1. Preparation work: First, prepare the road to be paved, make sure it is flat, dry, and clear of any obstacles.
2. Rubber material preparation: Mix the rubber material in an appropriate proportion and heat it to a certain temperature to make it soft and easy to lay.
3. Paving process: The rubber paver sprays the heat-softened rubber material evenly on the road surface. Pavers usually have a container that holds a rubber material that is sprayed evenly onto the road surface through a nozzle. At the same time, the paver also uses scrapers or rollers to flatten and squeeze the rubber material and ensure that it adheres tightly to the road surface.
4. Paving control: Rubber pavers are usually equipped with some control equipment to ensure the thickness, width and uniformity of the rubber material. These control devices can be adjusted as needed to meet specific laying requirements.
5. Subsequent processing: Once the rubber material is laid, some subsequent processing is usually required, such as using rollers to further compact the rubber material to improve its durability and stability. In addition, it can also perform marking and marking work on rubber pavement.
The rubber paver achieves the paving of rubber pavement by evenly spraying, flattening and squeezing the heat-softened rubber material onto the road surface. This working principle can improve the smoothness, durability and comfort of the road surface, and reduce noise and vibration to a certain extent.
https://www.dycmachinery.com/
