1. Before use, check whether all the fasteners of the machine are tightened and the belt is tensioned.
2. The running direction of the spindle is in accordance with the direction of the arrow shown on the protective cover, otherwise it will damage the machine and may cause personal injury.
3. Check whether the electrical appliances are complete.
4. Check whether there are hard debris such as metal in the crushing room of the machine, otherwise it will damage the cutter and affect the operation of the powder pulverizer machine.
5. The purity of the material must be checked before crushing, and no metal hard debris is allowed to be mixed in, so as not to damage the knife or cause accidents such as burning.
6. The oil cup on the machine should be filled with lubricating oil frequently so that the machine can run normally.
7. Stop feeding before stopping the powder pulverizer machine. If you do not continue to use it, remove the residues in the machine.
8. Regularly check whether the cutter and the screen are damaged, and replace them immediately if damaged.
9. When in use, there will be slight vibration. Be sure to tighten the cover connection handle to avoid accidents.
https://www.dycmachinery.com/
