What are the parts of the rubber powder crusher device?
Rubber powder pulverizer is usually composed of multiple parts, each of which plays an important role. The following are the common parts of rubber powder pulverizer:
1. Feeding system: A system used to feed raw rubber into the crusher, usually including components such as a feeding conveyor belt and a feeding port.
2. Cutting device: A device used to cut and crush raw rubber, usually including knives, cutter discs, cutting chambers and other components.
3. Crushing chamber: The space used for rubber crushing, usually including rotor, stator, screen and other components.
4. Transmission system: The system used to drive the various components of the crusher, usually including motors, belts, gear boxes and other components.
5. Discharge system: A system used to discharge crushed rubber particles, usually including components such as a discharge port and a conveyor belt.
6. Electrical control system: A system used to control the movement and operation of various components of the crusher, usually including control boxes, switches, sensors and other components.
7. Cooling system: A system used to reduce the heat generated during the operation of the crusher, usually including components such as radiator and cooling water circulation system.
8. Safety protection system: A system used to ensure the safety of the crusher during operation, usually including safety doors, emergency stop buttons, protective covers and other components.
https://www.dycmachinery.com/
