1,install the seat rest
Insert the seat rest into the square hole of the longerons, and fixed it by the pins.
The seat rest can install on the any side of the paving machine.
2,install the electrical control panel
Warning! Install the electric cabinet is to cut off power supply.
Take out the electrical control panel from the transmission box, and fixed it on the seat rest by pins.
3,Operate the machine up and down
Open the power switch, and the power indicator light is light.
4,adjust the height of the pre-strike-off rail
According to the prospective thickness of the coating strip, Adjust setting screw to set the height of the5, adjust the screed height and angle
According to the prospective thickness of the coating strip, adjust the setting screw to set the height of the screed.
6,Adjust the temperatures of the screed
Hot surface During operation and for a short time after the heating board can reach a high temperature.Avoid direct contact with the surface.
7. movement in paving progress
Warning! Don't put hands near it when machine operation!
8,shaking operation:
Turn on the shaking switch, the screed is shaking.
